super-hard material cubic hydraulic press

1. diameter 650mm 2.Motor power 15+11+5.5KW 3.Electrical heating power 40KVA 4.Nominal pressure(single cylinder) 36500kN

Introduction :

The 6×36,500KN hinge-type diamond synthesis cubic hydraulic press is an ultra-high pressure machine and one of the major equipment, which is widely, used in the synthetic diamond and super-hard material production sectors in China.

It has many advantages such as compact composition, flexible operation, easy maintenance quick putting into production and high profit return etc. It can meet the needs of research and production of abrasive grain synthetic diamond, big-grain mono-crystal synthetic diamond, polishing crystal diamond and polycrystalline diamond, Cubic nitrogen boron, PCD, PCBN synthetic material etc.

Major Technical Parameter :

Model:		CS-X
Nominal pressure(single cylinder):		36500kN
Cylinder diameter:		Φ650mm
Working pressure:	six cylinder	6/36500kN
	high pressure	14.3Mpa
	ultra-high pressure	110MPa
Maximum stroke of cylinder piston		100mm
Open height ( The distance from the small end face of bolster block to the center line of cubic chamber when the piston returns to the end)		280mm (The height of bolster block is 152mm)
Close height ( The distance from the small end face of bolster block to the center line of cubic chamber when the piston goes forward at the maximum stroke )		180mm (The height of bolster block is 152mm)
Boosting ratio		7.7:1
Maximum stroke of booster piston		460mm
Electrical heating power		40KVA
Motor power		15+11+5.5KW
Outer dimension (L×W×H)		2900×2900×3450(mm)
Gross weight		52.5 tons

By the way we can provide the series of machines to produce sythetic diamond  and the related technology if you have interest please contact us.

super-hard material cubic hydraulic press